Changes between Version 13 and Version 14 of KyoshoICserialcom


Ignore:
Timestamp:
10/27/09 12:15:40 (15 years ago)
Author:
pinwc4
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • KyoshoICserialcom

    v13 v14  
    22= Kyosho IC lap counter communication overview = 
    33 
    4 The Kyosho IC lap counter is based on the Melexis 90121 RFID chip with an Atmel microcontroller.  In order to communicate with this RFID reader you must set your serial device to 38400 baud, 8 data bits, 1 stop bit, no parity.  This reader is using the [wiki:ISO15693] protocol like the [wiki:S6350 TI reader].  Though the protocol is the same the commands used to execute the protocol are different.  The Kyosho IC lap counter also supports a [wiki:KyoshoICserialcom#AutomaticPollingMode automatic polling mode] that the TI reader does not support. 
     4The Kyosho IC lap counter is based on the Melexis 90121 RFID chip with an Atmel microcontroller.  Hardware specific information can be found [wiki:KyoshoICLapCounter here].   
     5 
     6Though the protocol is the same the commands used to execute the protocol are different.  The Kyosho IC lap counter also supports a [wiki:KyoshoICserialcom#AutomaticPollingMode automatic polling mode] that the TI reader does not support. 
    57 
    68