= Kyosho IC Tag Lap Counter =

The Kyosho IC Tag Lap Counter is based on the [http://www.melexis.com/Wireless_ICs/RFID_Transceivers_1356MHz/1356MHz_RFID_Transceiver_78.aspx Melexis 90121] RFID transceiver chip interfaced with an [http://www.atmel.com/ Atmel microcontroller].  Communication with the microcontroller is achieved using a [http://www.ftdichip.com FTDI serial to usb convertor].  This RFID reader supports the ISO15693 standard.

In order to communicate with this RFID reader you must set your serial device to 38400 baud, 8 data bits, 1 stop bit, no parity.  This reader is using the [wiki:ISO15693] standard like the [wiki:S6350 TI reader].

Small [wiki:ISO15693tags 13.56MHz ISO15693 tags] should work.

You can find additional information on the communication protocol [wiki:KyoshoICserialcom here].