Changes between Version 2 and Version 3 of KyoshoICLapCounter


Ignore:
Timestamp:
02/18/10 16:08:20 (14 years ago)
Author:
pinwc4
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • KyoshoICLapCounter

    v2 v3  
    1 = Kyosho IC Lap Counter = 
     1= Kyosho IC Tag Lap Counter = 
    22 
    3 The Kyosho IC Lap Counter is based on the [http://www.melexis.com/Wireless_ICs/RFID_Transceivers_1356MHz/1356MHz_RFID_Transceiver_78.aspx Melexis 90121] RFID transceiver chip interfaced with an [http://www.atmel.com/ Atmel microcontroller].  Communication with the microcontroller is achieved using a [http://www.ftdichip.com FTDI serial to usb convertor].  This RFID reader supports the ISO15693 standard. 
     3The Kyosho IC Tag Lap Counter is based on the [http://www.melexis.com/Wireless_ICs/RFID_Transceivers_1356MHz/1356MHz_RFID_Transceiver_78.aspx Melexis 90121] RFID transceiver chip interfaced with an [http://www.atmel.com/ Atmel microcontroller].  Communication with the microcontroller is achieved using a [http://www.ftdichip.com FTDI serial to usb convertor].  This RFID reader supports the ISO15693 standard. 
    44 
    55In order to communicate with this RFID reader you must set your serial device to 38400 baud, 8 data bits, 1 stop bit, no parity.  This reader is using the [wiki:ISO15693] standard like the [wiki:S6350 TI reader].