Changes between Version 1 and Version 2 of KyoshoICLapCounter
- Timestamp:
- 10/27/09 12:37:22 (15 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
KyoshoICLapCounter
v1 v2 3 3 The Kyosho IC Lap Counter is based on the [http://www.melexis.com/Wireless_ICs/RFID_Transceivers_1356MHz/1356MHz_RFID_Transceiver_78.aspx Melexis 90121] RFID transceiver chip interfaced with an [http://www.atmel.com/ Atmel microcontroller]. Communication with the microcontroller is achieved using a [http://www.ftdichip.com FTDI serial to usb convertor]. This RFID reader supports the ISO15693 standard. 4 4 5 In order to communicate with this RFID reader you must set your serial device to 38400 baud, 8 data bits, 1 stop bit, no parity. This reader is using the [wiki:ISO15693] protocollike the [wiki:S6350 TI reader].5 In order to communicate with this RFID reader you must set your serial device to 38400 baud, 8 data bits, 1 stop bit, no parity. This reader is using the [wiki:ISO15693] standard like the [wiki:S6350 TI reader]. 6 6 7 7 Small [wiki:ISO15693tags 13.56MHz ISO15693 tags] should work.