| | 1 | = Kyosho IC Lap Counter = |
| | 2 | |
| | 3 | The Kyosho IC Lap Counter is based on the [http://www.melexis.com/Wireless_ICs/RFID_Transceivers_1356MHz/1356MHz_RFID_Transceiver_78.aspx Melexis 90121] RFID transceiver chip interfaced with an [http://www.atmel.com/ Atmel microcontroller]. Communication with the microcontroller is achieved using a [http://www.ftdichip.com FTDI serial to usb convertor]. This RFID reader supports the ISO15693 standard. |
| | 4 | |
| | 5 | In order to communicate with this RFID reader you must set your serial device to 38400 baud, 8 data bits, 1 stop bit, no parity. This reader is using the [wiki:ISO15693] protocol like the [wiki:S6350 TI reader]. |
| | 6 | |
| | 7 | Small [wiki:ISO15693tags 13.56MHz ISO15693 tags] should work. |
| | 8 | |
| | 9 | You can find additional information on the communication protocol [wiki:KyoshoICserialcom here]. |
