Changes between Version 1 and Version 2 of GettingStarted
- Timestamp:
- 10/19/08 21:28:24 (16 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GettingStarted
v1 v2 3 3 Before you can use the Core lap counter you must configure the serial device. This is done by going to the Config. page of the software. Toward the bottom of this page you need to select which COM device that the Core lap counter is on and click the save connection button. 4 4 5 == Windows help == 6 5 '''Windows Specific:''' 7 6 Most likely in Windows the COM device will be the last in the list. 8 7 9 == Mac help == 10 8 '''Mac Specific:''' 11 9 Most likely the device will start with usb- followed by a series of numbers 12 10