| 1 | #tag Class |
|---|
| 2 | Protected Class ICSSerialPort |
|---|
| 3 | Inherits serial |
|---|
| 4 | #tag Event |
|---|
| 5 | Sub DataAvailable() |
|---|
| 6 | //Add to the buffer first |
|---|
| 7 | |
|---|
| 8 | buffer = buffer + me.ReadAll |
|---|
| 9 | |
|---|
| 10 | //Figure out if we need to do anything |
|---|
| 11 | |
|---|
| 12 | select case mode |
|---|
| 13 | |
|---|
| 14 | case "read" |
|---|
| 15 | dim flagstart as integer |
|---|
| 16 | dim datastart as integer |
|---|
| 17 | |
|---|
| 18 | //We need to decode the packet to figure out the values |
|---|
| 19 | |
|---|
| 20 | //First we need to make sure we have enough data |
|---|
| 21 | //If not we need to wait for more |
|---|
| 22 | |
|---|
| 23 | flagstart = InStrb(buffer, ChrB(&h5A)) |
|---|
| 24 | |
|---|
| 25 | if flagstart = 0 then |
|---|
| 26 | //We did not find a match so we can discard the data and wait for more |
|---|
| 27 | buffer = "" |
|---|
| 28 | return |
|---|
| 29 | ElseIf lenb(buffer) < 17 + flagStart - 1 then |
|---|
| 30 | // we do not have a complete packet return and wait |
|---|
| 31 | return |
|---|
| 32 | end if |
|---|
| 33 | |
|---|
| 34 | datastart = flagstart + 1 |
|---|
| 35 | |
|---|
| 36 | byte03 = midb(buffer, datastart, 1) |
|---|
| 37 | byte04 = midb(buffer, datastart+1, 1) |
|---|
| 38 | byte05 = midb(buffer, datastart+2, 1) |
|---|
| 39 | byte06 = midb(buffer, datastart+3, 1) |
|---|
| 40 | byte07 = midb(buffer, datastart+4, 1) |
|---|
| 41 | byte08 = midb(buffer, datastart+5, 1) |
|---|
| 42 | byte09 = midb(buffer, datastart+6, 1) |
|---|
| 43 | byte10 = midb(buffer, datastart+7, 1) |
|---|
| 44 | byte11 = midb(buffer, datastart+8, 1) |
|---|
| 45 | byte12 = midb(buffer, datastart+9, 1) |
|---|
| 46 | byte13 = midb(buffer, datastart+10, 1) |
|---|
| 47 | byte14 = midb(buffer, datastart+11, 1) |
|---|
| 48 | byte15 = midb(buffer, datastart+12, 1) |
|---|
| 49 | byte16 = midb(buffer, datastart+13, 1) |
|---|
| 50 | byte17 = midb(buffer, datastart+14, 1) |
|---|
| 51 | |
|---|
| 52 | valuesChanged() |
|---|
| 53 | |
|---|
| 54 | else |
|---|
| 55 | |
|---|
| 56 | //We do not care about the data, discard it |
|---|
| 57 | buffer = "" |
|---|
| 58 | |
|---|
| 59 | end select |
|---|
| 60 | End Sub |
|---|
| 61 | #tag EndEvent |
|---|
| 62 | |
|---|
| 63 | |
|---|
| 64 | #tag Method, Flags = &h0 |
|---|
| 65 | Sub calculateChecksum() |
|---|
| 66 | //Use this to calculate byte 18, the checksum |
|---|
| 67 | //The checksum is just adding bytes 2-17 together but rounded at each byte |
|---|
| 68 | |
|---|
| 69 | dim i as integer |
|---|
| 70 | |
|---|
| 71 | i = (asc(byte02) + asc(byte03)) mod &h100 |
|---|
| 72 | i = (i + asc(byte04)) mod &h100 |
|---|
| 73 | i = (i + asc(byte05)) mod &h100 |
|---|
| 74 | i = (i + asc(byte06)) mod &h100 |
|---|
| 75 | i = (i + asc(byte07)) mod &h100 |
|---|
| 76 | i = (i + asc(byte08)) mod &h100 |
|---|
| 77 | i = (i + asc(byte09)) mod &h100 |
|---|
| 78 | i = (i + asc(byte10)) mod &h100 |
|---|
| 79 | i = (i + asc(byte11)) mod &h100 |
|---|
| 80 | i = (i + asc(byte12)) mod &h100 |
|---|
| 81 | i = (i + asc(byte13)) mod &h100 |
|---|
| 82 | i = (i + asc(byte14)) mod &h100 |
|---|
| 83 | i = (i + asc(byte15)) mod &h100 |
|---|
| 84 | i = (i + asc(byte16)) mod &h100 |
|---|
| 85 | i = (i + asc(byte17)) mod &h100 |
|---|
| 86 | |
|---|
| 87 | byte18 = chrb(i) |
|---|
| 88 | End Sub |
|---|
| 89 | #tag EndMethod |
|---|
| 90 | |
|---|
| 91 | #tag Method, Flags = &h0 |
|---|
| 92 | Sub Constructor() |
|---|
| 93 | //Make sure we have a database and if not create it |
|---|
| 94 | dim exists as boolean |
|---|
| 95 | |
|---|
| 96 | exists = prepareDB() |
|---|
| 97 | if exists = false then |
|---|
| 98 | //No database available, create one |
|---|
| 99 | createDB() |
|---|
| 100 | else |
|---|
| 101 | //Database exists, connect to it |
|---|
| 102 | if fsicsdb.Connect = false then |
|---|
| 103 | MsgBox "Database connection failed" |
|---|
| 104 | end if |
|---|
| 105 | end if |
|---|
| 106 | |
|---|
| 107 | //Set default byte values |
|---|
| 108 | byte01 = chrb(&hD5) |
|---|
| 109 | byte02 = chrb(&h5A) |
|---|
| 110 | byte03 = chrb(&h64) |
|---|
| 111 | byte04 = chrb(&hFF) |
|---|
| 112 | byte05 = chrb(&h02) |
|---|
| 113 | byte06 = chrb(&h02) |
|---|
| 114 | byte07 = chrb(&h01) |
|---|
| 115 | byte08 = chrb(&hFF) |
|---|
| 116 | byte09 = chrb(&hBC) |
|---|
| 117 | byte10 = chrb(&h44) |
|---|
| 118 | byte11 = chrb(&h88) |
|---|
| 119 | byte12 = chrb(&h78) |
|---|
| 120 | byte13 = chrb(&hFF) |
|---|
| 121 | byte14 = chrb(&h2C) |
|---|
| 122 | byte15 = chrb(&h05) |
|---|
| 123 | byte16 = chrb(&h5A) |
|---|
| 124 | byte17 = chrb(&h3C) |
|---|
| 125 | byte18 = chrb(&h87) |
|---|
| 126 | |
|---|
| 127 | carType = "MR-03" |
|---|
| 128 | End Sub |
|---|
| 129 | #tag EndMethod |
|---|
| 130 | |
|---|
| 131 | #tag Method, Flags = &h21 |
|---|
| 132 | Private Sub createDB() |
|---|
| 133 | //Create a new database |
|---|
| 134 | |
|---|
| 135 | |
|---|
| 136 | //make sure we can create the file |
|---|
| 137 | if fsicsdb.CreateDatabaseFile() then |
|---|
| 138 | if fsicsdb.Connect() then |
|---|
| 139 | dim query as string |
|---|
| 140 | query = "CREATE TABLE carprofiles (id INTEGER PRIMARY KEY, name VARCHAR, cartype VARCHAR, byte01 INTEGER, byte02 INTEGER, byte03 INTEGER, byte04 INTEGER, byte05 INTEGER, byte06 INTEGER"+_ |
|---|
| 141 | ", byte07 INTEGER, byte08 INTEGER, byte09 INTEGER, byte10 INTEGER, byte11 INTEGER, byte12 INTEGER, byte13 INTEGER, byte14 INTEGER, byte15 INTEGER, byte16 INTEGER, byte17 INTEGER"+_ |
|---|
| 142 | ", byte18 INTEGER, UNIQUE(name))" |
|---|
| 143 | fsicsdb.SQLExecute(query) |
|---|
| 144 | if fsicsdb.Error then |
|---|
| 145 | MsgBox "Database Error (carprofiles):" + fsicsdb.ErrorMessage |
|---|
| 146 | fsicsdb.Rollback |
|---|
| 147 | |
|---|
| 148 | else |
|---|
| 149 | fsicsdb.Commit |
|---|
| 150 | end if |
|---|
| 151 | |
|---|
| 152 | |
|---|
| 153 | else |
|---|
| 154 | MsgBox "Failed to connect to new database file" |
|---|
| 155 | end if |
|---|
| 156 | else |
|---|
| 157 | //Failed to create database file |
|---|
| 158 | MsgBox "Failed to create database file" |
|---|
| 159 | end if |
|---|
| 160 | End Sub |
|---|
| 161 | #tag EndMethod |
|---|
| 162 | |
|---|
| 163 | #tag Method, Flags = &h0 |
|---|
| 164 | Function createProfile(theName as String) As Boolean |
|---|
| 165 | dim success as boolean |
|---|
| 166 | success = false |
|---|
| 167 | |
|---|
| 168 | //Make sure we got a name |
|---|
| 169 | if theName = "" then |
|---|
| 170 | return success |
|---|
| 171 | else |
|---|
| 172 | //Build a new database record |
|---|
| 173 | dim rec as DatabaseRecord |
|---|
| 174 | rec = New DatabaseRecord |
|---|
| 175 | |
|---|
| 176 | rec.Column("name") = theName |
|---|
| 177 | rec.Column("cartype") = carType |
|---|
| 178 | rec.IntegerColumn("byte01") = asc(byte01) |
|---|
| 179 | rec.IntegerColumn("byte02") = asc(byte02) |
|---|
| 180 | rec.IntegerColumn("byte03") = asc(byte03) |
|---|
| 181 | rec.IntegerColumn("byte04") = asc(byte04) |
|---|
| 182 | rec.IntegerColumn("byte05") = asc(byte05) |
|---|
| 183 | rec.IntegerColumn("byte06") = asc(byte06) |
|---|
| 184 | rec.IntegerColumn("byte07") = asc(byte07) |
|---|
| 185 | rec.IntegerColumn("byte08") = asc(byte08) |
|---|
| 186 | rec.IntegerColumn("byte09") = asc(byte09) |
|---|
| 187 | rec.IntegerColumn("byte10") = asc(byte10) |
|---|
| 188 | rec.IntegerColumn("byte11") = asc(byte11) |
|---|
| 189 | rec.IntegerColumn("byte12") = asc(byte12) |
|---|
| 190 | rec.IntegerColumn("byte13") = asc(byte13) |
|---|
| 191 | rec.IntegerColumn("byte14") = asc(byte14) |
|---|
| 192 | rec.IntegerColumn("byte15") = asc(byte15) |
|---|
| 193 | rec.IntegerColumn("byte16") = asc(byte16) |
|---|
| 194 | rec.IntegerColumn("byte17") = asc(byte17) |
|---|
| 195 | rec.IntegerColumn("byte18") = asc(byte18) |
|---|
| 196 | |
|---|
| 197 | fsicsdb.InsertRecord("carprofiles", rec) |
|---|
| 198 | |
|---|
| 199 | if fsicsdb.Error = True then |
|---|
| 200 | MsgBox "Error creating profile, " + fsicsdb.ErrorMessage |
|---|
| 201 | fsicsdb.Rollback |
|---|
| 202 | else |
|---|
| 203 | fsicsdb.Commit |
|---|
| 204 | success = true |
|---|
| 205 | end if |
|---|
| 206 | end if |
|---|
| 207 | |
|---|
| 208 | Return success |
|---|
| 209 | End Function |
|---|
| 210 | #tag EndMethod |
|---|
| 211 | |
|---|
| 212 | #tag Method, Flags = &h0 |
|---|
| 213 | Sub deleteProfile(theName as String) |
|---|
| 214 | if theName <> "" then |
|---|
| 215 | |
|---|
| 216 | //Delete the profile selected |
|---|
| 217 | fsicsdb.SQLExecute("DELETE FROM carprofiles WHERE name = '" + theName + "'") |
|---|
| 218 | |
|---|
| 219 | //Check for errors |
|---|
| 220 | if fsicsdb.Error = True then |
|---|
| 221 | MsgBox "Error deleting profile" |
|---|
| 222 | fsicsdb.Rollback |
|---|
| 223 | else |
|---|
| 224 | fsicsdb.Commit |
|---|
| 225 | end if |
|---|
| 226 | |
|---|
| 227 | else |
|---|
| 228 | |
|---|
| 229 | MsgBox "Please select a profile to delete" |
|---|
| 230 | |
|---|
| 231 | end if |
|---|
| 232 | End Sub |
|---|
| 233 | #tag EndMethod |
|---|
| 234 | |
|---|
| 235 | #tag Method, Flags = &h0 |
|---|
| 236 | Sub exportProfile(theName as string) |
|---|
| 237 | dim xml as XmlDocument |
|---|
| 238 | dim root as XmlNode |
|---|
| 239 | dim rootchild as XmlNode |
|---|
| 240 | dim rs as RecordSet |
|---|
| 241 | dim i as integer |
|---|
| 242 | dim dlg as SaveAsDialog |
|---|
| 243 | dim f as FolderItem |
|---|
| 244 | |
|---|
| 245 | dlg = New SaveAsDialog |
|---|
| 246 | dlg.Title = "Export your profile" |
|---|
| 247 | #if TargetLinux |
|---|
| 248 | dlg.InitialDirectory = SpecialFolder.Home |
|---|
| 249 | #else |
|---|
| 250 | dlg.InitialDirectory = SpecialFolder.Documents |
|---|
| 251 | #endif |
|---|
| 252 | |
|---|
| 253 | dlg.SuggestedFileName = "ics_"+theName+".xml" |
|---|
| 254 | f = dlg.ShowModal() |
|---|
| 255 | |
|---|
| 256 | if f <> Nil then |
|---|
| 257 | //Nothing to see here, move along |
|---|
| 258 | else |
|---|
| 259 | MsgBox "You must choose a file" |
|---|
| 260 | Return |
|---|
| 261 | end if |
|---|
| 262 | |
|---|
| 263 | //Find the record |
|---|
| 264 | rs = fsicsdb.SQLSelect("SELECT * FROM carprofiles WHERE name= '"+theName+"'") |
|---|
| 265 | |
|---|
| 266 | if rs <> Nil then |
|---|
| 267 | //We have a record, so do something |
|---|
| 268 | |
|---|
| 269 | //Create the root element of the XML file |
|---|
| 270 | xml = New XmlDocument |
|---|
| 271 | root = xml.AppendChild(xml.CreateElement("icsprofile")) |
|---|
| 272 | |
|---|
| 273 | //Itterate all available fields and write them to the xml document |
|---|
| 274 | for i = 1 to rs.FieldCount |
|---|
| 275 | if rs.IdxField(i).Name <> "" and rs.IdxField(i).StringValue<> "" then |
|---|
| 276 | |
|---|
| 277 | rootchild = root.AppendChild(xml.CreateElement(rs.IdxField(i).Name)) |
|---|
| 278 | rootchild.AppendChild(xml.CreateTextNode(rs.IdxField(i).StringValue)) |
|---|
| 279 | end if |
|---|
| 280 | next |
|---|
| 281 | |
|---|
| 282 | //Write the document to a file |
|---|
| 283 | xml.SaveXml(f) |
|---|
| 284 | else |
|---|
| 285 | MsgBox "No profile to export" |
|---|
| 286 | Return |
|---|
| 287 | end if |
|---|
| 288 | |
|---|
| 289 | End Sub |
|---|
| 290 | #tag EndMethod |
|---|
| 291 | |
|---|
| 292 | #tag Method, Flags = &h0 |
|---|
| 293 | Function importProfile() As Boolean |
|---|
| 294 | dim success as boolean |
|---|
| 295 | dim dlg as OpenDialog |
|---|
| 296 | dim f as FolderItem |
|---|
| 297 | dim xdoc as XmlDocument |
|---|
| 298 | dim root as XmlNode |
|---|
| 299 | dim i as integer |
|---|
| 300 | dim count as Integer |
|---|
| 301 | dim item as string |
|---|
| 302 | dim rec as DatabaseRecord |
|---|
| 303 | dim theName as string |
|---|
| 304 | |
|---|
| 305 | rec = New DatabaseRecord |
|---|
| 306 | success = False |
|---|
| 307 | |
|---|
| 308 | |
|---|
| 309 | //Get the user to select a file |
|---|
| 310 | dlg = New OpenDialog |
|---|
| 311 | dlg.Title = "Select a profile to import" |
|---|
| 312 | #if TargetLinux |
|---|
| 313 | dlg.InitialDirectory = SpecialFolder.Home |
|---|
| 314 | #else |
|---|
| 315 | dlg.InitialDirectory = SpecialFolder.Documents |
|---|
| 316 | #endif |
|---|
| 317 | f = dlg.ShowModal() |
|---|
| 318 | |
|---|
| 319 | //If we have a valid file we need to read it as an xml file to process it |
|---|
| 320 | //Items are individually specified to prevent the program from trying to insert columns that do not exist |
|---|
| 321 | //All column names should match the database table |
|---|
| 322 | |
|---|
| 323 | if f <> nil then |
|---|
| 324 | |
|---|
| 325 | //Read the XML file |
|---|
| 326 | xdoc = New XmlDocument(f) |
|---|
| 327 | |
|---|
| 328 | count = xdoc.DocumentElement.ChildCount |
|---|
| 329 | |
|---|
| 330 | for i = 0 to count - 1 |
|---|
| 331 | root = xdoc.DocumentElement.Child(i) |
|---|
| 332 | |
|---|
| 333 | item = root.FirstChild.Value |
|---|
| 334 | |
|---|
| 335 | select case root.Name |
|---|
| 336 | |
|---|
| 337 | case "name" |
|---|
| 338 | theName = item |
|---|
| 339 | case "cartype" |
|---|
| 340 | carType = item |
|---|
| 341 | case "byte01" |
|---|
| 342 | byte01 = chrb(val(item)) |
|---|
| 343 | case "byte02" |
|---|
| 344 | byte02 = chrb(val(item)) |
|---|
| 345 | case "byte03" |
|---|
| 346 | byte03 = chrb(val(item)) |
|---|
| 347 | case "byte04" |
|---|
| 348 | byte04 = chrb(val(item)) |
|---|
| 349 | case "byte05" |
|---|
| 350 | byte05 = chrb(val(item)) |
|---|
| 351 | case "byte06" |
|---|
| 352 | byte06 = chrb(val(item)) |
|---|
| 353 | case "byte07" |
|---|
| 354 | byte07 = chrb(val(item)) |
|---|
| 355 | case "byte08" |
|---|
| 356 | byte08 = chrb(val(item)) |
|---|
| 357 | case "byte09" |
|---|
| 358 | byte09 = chrb(val(item)) |
|---|
| 359 | case "byte10" |
|---|
| 360 | byte10 = chrb(val(item)) |
|---|
| 361 | case "byte11" |
|---|
| 362 | byte11 = chrb(val(item)) |
|---|
| 363 | case "byte12" |
|---|
| 364 | byte12 = chrb(val(item)) |
|---|
| 365 | case "byte13" |
|---|
| 366 | byte13 = chrb(val(item)) |
|---|
| 367 | case "byte14" |
|---|
| 368 | byte14 = chrb(val(item)) |
|---|
| 369 | case "byte15" |
|---|
| 370 | byte15 = chrb(val(item)) |
|---|
| 371 | case "byte16" |
|---|
| 372 | byte16 = chrb(val(item)) |
|---|
| 373 | case "byte17" |
|---|
| 374 | byte17 = chrb(val(item)) |
|---|
| 375 | case "byte18" |
|---|
| 376 | byte18 = chrb(val(item)) |
|---|
| 377 | |
|---|
| 378 | end select |
|---|
| 379 | |
|---|
| 380 | next |
|---|
| 381 | |
|---|
| 382 | else |
|---|
| 383 | //File not select we can stop |
|---|
| 384 | success = False |
|---|
| 385 | return success |
|---|
| 386 | end if |
|---|
| 387 | |
|---|
| 388 | //Now check to make sure their is not an existing profile with this name |
|---|
| 389 | dim rs as RecordSet |
|---|
| 390 | |
|---|
| 391 | rs = fsicsdb.SQLSelect("SELECT * FROM carprofiles WHERE name= '"+theName+"'") |
|---|
| 392 | |
|---|
| 393 | if rs <> Nil then |
|---|
| 394 | |
|---|
| 395 | if rs.RecordCount > 0 then |
|---|
| 396 | //we have a duplicate record |
|---|
| 397 | //we need to prompt the user about what to do |
|---|
| 398 | dim d as New MessageDialog |
|---|
| 399 | dim b as MessageDialogButton |
|---|
| 400 | d.Icon = MessageDialog.GraphicCaution |
|---|
| 401 | d.ActionButton.Caption = "Yes" |
|---|
| 402 | d.CancelButton.Visible = True |
|---|
| 403 | d.CancelButton.Caption = "No" |
|---|
| 404 | d.Message = "A profile exists with this name, do you want to overwrite the existing profile?" |
|---|
| 405 | b = d.ShowModal |
|---|
| 406 | |
|---|
| 407 | //Now determine what the user chose |
|---|
| 408 | Select Case b |
|---|
| 409 | case d.ActionButton |
|---|
| 410 | //The user wants to overwrite the record so we can just save what we have |
|---|
| 411 | saveProfile(theName) |
|---|
| 412 | success = True |
|---|
| 413 | //Values changed because of the overwrite |
|---|
| 414 | valuesChanged() |
|---|
| 415 | case d.CancelButton |
|---|
| 416 | //The user chose not to overwrite the record, we need to come up with a new name |
|---|
| 417 | //We will increment the number until we find a name not used or we hit 32 just in case an infinite loop would occur |
|---|
| 418 | dim tempString as string |
|---|
| 419 | dim tempName as string |
|---|
| 420 | i = 0 |
|---|
| 421 | while rs.RecordCount > 0 |
|---|
| 422 | i = i + 1 |
|---|
| 423 | tempString = str(i) |
|---|
| 424 | tempName = theName + tempString |
|---|
| 425 | //Check to make sure we are not in an infinite looooooooop |
|---|
| 426 | //If we are something went wrong |
|---|
| 427 | if i > 31 then |
|---|
| 428 | exit While |
|---|
| 429 | end if |
|---|
| 430 | rs = fsicsdb.SQLSelect("SELECT * FROM carprofiles WHERE name = '"+tempName+"'") |
|---|
| 431 | |
|---|
| 432 | wend |
|---|
| 433 | //OK we have a unique name at this point |
|---|
| 434 | theName = theName + tempString |
|---|
| 435 | saveProfile(theName) |
|---|
| 436 | success = True |
|---|
| 437 | //new profile was imported |
|---|
| 438 | profileImported(theName) |
|---|
| 439 | end select |
|---|
| 440 | |
|---|
| 441 | else |
|---|
| 442 | //No duplicate exists so we can just insert the record |
|---|
| 443 | saveProfile(theName) |
|---|
| 444 | success = True |
|---|
| 445 | //new profile was imported |
|---|
| 446 | profileImported(theName) |
|---|
| 447 | end if |
|---|
| 448 | //Close our record |
|---|
| 449 | rs.Close |
|---|
| 450 | |
|---|
| 451 | end if |
|---|
| 452 | |
|---|
| 453 | Return success |
|---|
| 454 | |
|---|
| 455 | End Function |
|---|
| 456 | #tag EndMethod |
|---|
| 457 | |
|---|
| 458 | #tag Method, Flags = &h0 |
|---|
| 459 | Function listProfiles() As String() |
|---|
| 460 | dim rs as RecordSet |
|---|
| 461 | dim s() as string |
|---|
| 462 | |
|---|
| 463 | //Find records |
|---|
| 464 | rs = fsicsdb.SQLSelect("SELECT name FROM carprofiles") |
|---|
| 465 | |
|---|
| 466 | if rs <> nil then |
|---|
| 467 | |
|---|
| 468 | while rs.EOF = false |
|---|
| 469 | s.Append rs.Field("name").StringValue |
|---|
| 470 | rs.MoveNext |
|---|
| 471 | wend |
|---|
| 472 | |
|---|
| 473 | end if |
|---|
| 474 | |
|---|
| 475 | rs.Close |
|---|
| 476 | Return s() |
|---|
| 477 | End Function |
|---|
| 478 | #tag EndMethod |
|---|
| 479 | |
|---|
| 480 | #tag Method, Flags = &h0 |
|---|
| 481 | Sub loadProfile(theName as string) |
|---|
| 482 | //Find the profile in the database, update the bytes and fire the event |
|---|
| 483 | dim rs as RecordSet |
|---|
| 484 | |
|---|
| 485 | rs = fsicsdb.SQLSelect("SELECT * FROM carprofiles WHERE name= '"+theName+"'") |
|---|
| 486 | |
|---|
| 487 | //Make sure we got a record to work with |
|---|
| 488 | if rs <> Nil then |
|---|
| 489 | |
|---|
| 490 | if rs.Field("cartype").StringValue <> "" then |
|---|
| 491 | carType = rs.Field("cartype").StringValue |
|---|
| 492 | end if |
|---|
| 493 | |
|---|
| 494 | if rs.Field("byte01").StringValue <> "" then |
|---|
| 495 | byte01 = chrb(rs.Field("byte01").IntegerValue) |
|---|
| 496 | end if |
|---|
| 497 | if rs.Field("byte02").StringValue <> "" then |
|---|
| 498 | byte02 = chrb(rs.Field("byte02").IntegerValue) |
|---|
| 499 | end if |
|---|
| 500 | if rs.Field("byte03").StringValue <> "" then |
|---|
| 501 | byte03 = chrb(rs.Field("byte03").IntegerValue) |
|---|
| 502 | end if |
|---|
| 503 | if rs.Field("byte04").StringValue <> "" then |
|---|
| 504 | byte04 = chrb(rs.Field("byte04").IntegerValue) |
|---|
| 505 | end if |
|---|
| 506 | if rs.Field("byte05").StringValue <> "" then |
|---|
| 507 | byte05 = chrb(rs.Field("byte05").IntegerValue) |
|---|
| 508 | end if |
|---|
| 509 | if rs.Field("byte06").StringValue <> "" then |
|---|
| 510 | byte06 = chrb(rs.Field("byte06").IntegerValue) |
|---|
| 511 | end if |
|---|
| 512 | if rs.Field("byte07").StringValue <> "" then |
|---|
| 513 | byte07 = chrb(rs.Field("byte07").IntegerValue) |
|---|
| 514 | end if |
|---|
| 515 | if rs.Field("byte08").StringValue <> "" then |
|---|
| 516 | byte08 = chrb(rs.Field("byte08").IntegerValue) |
|---|
| 517 | end if |
|---|
| 518 | if rs.Field("byte09").StringValue <> "" then |
|---|
| 519 | byte09 = chrb(rs.Field("byte09").IntegerValue) |
|---|
| 520 | end if |
|---|
| 521 | if rs.Field("byte10").StringValue <> "" then |
|---|
| 522 | byte10 = chrb(rs.Field("byte10").IntegerValue) |
|---|
| 523 | end if |
|---|
| 524 | if rs.Field("byte11").StringValue <> "" then |
|---|
| 525 | byte11 = chrb(rs.Field("byte11").IntegerValue) |
|---|
| 526 | end if |
|---|
| 527 | if rs.Field("byte12").StringValue <> "" then |
|---|
| 528 | byte12 = chrb(rs.Field("byte12").IntegerValue) |
|---|
| 529 | end if |
|---|
| 530 | if rs.Field("byte13").StringValue <> "" then |
|---|
| 531 | byte13 = chrb(rs.Field("byte13").IntegerValue) |
|---|
| 532 | end if |
|---|
| 533 | if rs.Field("byte14").StringValue <> "" then |
|---|
| 534 | byte14 = chrb(rs.Field("byte14").IntegerValue) |
|---|
| 535 | end if |
|---|
| 536 | if rs.Field("byte15").StringValue <> "" then |
|---|
| 537 | byte15 = chrb(rs.Field("byte15").IntegerValue) |
|---|
| 538 | end if |
|---|
| 539 | if rs.Field("byte16").StringValue <> "" then |
|---|
| 540 | byte16 = chrb(rs.Field("byte16").IntegerValue) |
|---|
| 541 | end if |
|---|
| 542 | if rs.Field("byte17").StringValue <> "" then |
|---|
| 543 | byte17 = chrb(rs.Field("byte17").IntegerValue) |
|---|
| 544 | end if |
|---|
| 545 | if rs.Field("byte18").StringValue <> "" then |
|---|
| 546 | byte18 = chrb(rs.Field("byte18").IntegerValue) |
|---|
| 547 | end if |
|---|
| 548 | |
|---|
| 549 | valuesChanged() |
|---|
| 550 | end if |
|---|
| 551 | End Sub |
|---|
| 552 | #tag EndMethod |
|---|
| 553 | |
|---|
| 554 | #tag Method, Flags = &h21 |
|---|
| 555 | Private Function prepareDB() As Boolean |
|---|
| 556 | //Open the database file |
|---|
| 557 | fsicsdb = new REALSQLDatabase |
|---|
| 558 | dim f as FolderItem = GetFolderItem("fsicsdb") |
|---|
| 559 | fsicsdb.DatabaseFile = f |
|---|
| 560 | |
|---|
| 561 | return f.Exists |
|---|
| 562 | End Function |
|---|
| 563 | #tag EndMethod |
|---|
| 564 | |
|---|
| 565 | #tag Method, Flags = &h0 |
|---|
| 566 | Sub readCar() |
|---|
| 567 | //Read values from the currently attached car |
|---|
| 568 | dim sendstring as string |
|---|
| 569 | |
|---|
| 570 | mode = "read" |
|---|
| 571 | |
|---|
| 572 | sendstring = chrb(&hC5) |
|---|
| 573 | |
|---|
| 574 | me.Write(sendstring) |
|---|
| 575 | End Sub |
|---|
| 576 | #tag EndMethod |
|---|
| 577 | |
|---|
| 578 | #tag Method, Flags = &h0 |
|---|
| 579 | Sub resetCar() |
|---|
| 580 | //This sends the command to reset the car back to a default configuration |
|---|
| 581 | //Defaults are different for each car type |
|---|
| 582 | setDefaultValues |
|---|
| 583 | |
|---|
| 584 | //Send the default values to the car |
|---|
| 585 | writeCar |
|---|
| 586 | End Sub |
|---|
| 587 | #tag EndMethod |
|---|
| 588 | |
|---|
| 589 | #tag Method, Flags = &h0 |
|---|
| 590 | Sub saveProfile(theName as String) |
|---|
| 591 | if theName <> "" then |
|---|
| 592 | |
|---|
| 593 | dim rs as RecordSet |
|---|
| 594 | dim status as Boolean |
|---|
| 595 | |
|---|
| 596 | //Find a record |
|---|
| 597 | rs = fsicsdb.SQLSelect("SELECT * FROM carprofiles WHERE name= '"+theName+"'") |
|---|
| 598 | |
|---|
| 599 | //Make sure we got a record |
|---|
| 600 | if rs <> nil then |
|---|
| 601 | //delete the record before saving |
|---|
| 602 | deleteProfile(theName) |
|---|
| 603 | end if |
|---|
| 604 | |
|---|
| 605 | rs.Close |
|---|
| 606 | |
|---|
| 607 | status = createProfile(theName) |
|---|
| 608 | |
|---|
| 609 | else |
|---|
| 610 | |
|---|
| 611 | MsgBox "Please select a profile to modify" |
|---|
| 612 | |
|---|
| 613 | end if |
|---|
| 614 | End Sub |
|---|
| 615 | #tag EndMethod |
|---|
| 616 | |
|---|
| 617 | #tag Method, Flags = &h0 |
|---|
| 618 | Sub setCarType(value as string) |
|---|
| 619 | //When setting car type we must reconfigure the serial port |
|---|
| 620 | //Some car types have a different baud rate |
|---|
| 621 | |
|---|
| 622 | select case value |
|---|
| 623 | |
|---|
| 624 | case "MR-03" |
|---|
| 625 | carType = value |
|---|
| 626 | byte15 = chrb(&h05) |
|---|
| 627 | byte16 = chrb(&h5A) |
|---|
| 628 | byte17 = chrb(&h3C) |
|---|
| 629 | case "dNaNo" |
|---|
| 630 | carType = value |
|---|
| 631 | byte15 = chrb(&hFF) |
|---|
| 632 | byte16 = chrb(&h80) |
|---|
| 633 | byte17 = chrb(&h80) |
|---|
| 634 | case "ASF" |
|---|
| 635 | carType = value |
|---|
| 636 | byte15 = chrb(&hFF) |
|---|
| 637 | byte16 = chrb(&hFF) |
|---|
| 638 | byte17 = chrb(&hFF) |
|---|
| 639 | |
|---|
| 640 | else |
|---|
| 641 | MsgBox "Error setting Car Type" |
|---|
| 642 | end select |
|---|
| 643 | |
|---|
| 644 | valuesChanged() |
|---|
| 645 | End Sub |
|---|
| 646 | #tag EndMethod |
|---|
| 647 | |
|---|
| 648 | #tag Method, Flags = &h0 |
|---|
| 649 | Sub setDefaultValues() |
|---|
| 650 | //Set the defaults for the bytes sent to a car |
|---|
| 651 | |
|---|
| 652 | select case carType |
|---|
| 653 | |
|---|
| 654 | case "MR-03" |
|---|
| 655 | byte01 = chrb(&hD5) |
|---|
| 656 | byte02 = chrb(&h5A) |
|---|
| 657 | byte03 = chrb(&h64) |
|---|
| 658 | byte04 = chrb(&hFF) |
|---|
| 659 | byte05 = chrb(&h02) |
|---|
| 660 | byte06 = chrb(&h02) |
|---|
| 661 | byte07 = chrb(&h01) |
|---|
| 662 | byte08 = chrb(&hFF) |
|---|
| 663 | byte09 = chrb(&hBC) |
|---|
| 664 | byte10 = chrb(&h44) |
|---|
| 665 | byte11 = chrb(&h88) |
|---|
| 666 | byte12 = chrb(&h78) |
|---|
| 667 | byte13 = chrb(&hFF) |
|---|
| 668 | byte14 = chrb(&h2C) |
|---|
| 669 | byte15 = chrb(&h05) |
|---|
| 670 | byte16 = chrb(&h5A) |
|---|
| 671 | byte17 = chrb(&h3C) |
|---|
| 672 | byte18 = chrb(&h87) |
|---|
| 673 | |
|---|
| 674 | case "dNaNo" |
|---|
| 675 | byte01 = chrb(&hD5) |
|---|
| 676 | byte02 = chrb(&h5A) |
|---|
| 677 | byte03 = chrb(&hFF) |
|---|
| 678 | byte04 = chrb(&hFF) |
|---|
| 679 | byte05 = chrb(&h0A) |
|---|
| 680 | byte06 = chrb(&h03) |
|---|
| 681 | byte07 = chrb(&h01) |
|---|
| 682 | byte08 = chrb(&h40) |
|---|
| 683 | byte09 = chrb(&hBC) |
|---|
| 684 | byte10 = chrb(&h44) |
|---|
| 685 | byte11 = chrb(&h88) |
|---|
| 686 | byte12 = chrb(&h78) |
|---|
| 687 | byte13 = chrb(&h03) |
|---|
| 688 | byte14 = chrb(&hFF) |
|---|
| 689 | byte15 = chrb(&hFF) |
|---|
| 690 | byte16 = chrb(&h80) |
|---|
| 691 | byte17 = chrb(&h80) |
|---|
| 692 | byte18 = chrb(&hA7) |
|---|
| 693 | |
|---|
| 694 | case "ASF" |
|---|
| 695 | byte01 = chrb(&hD5) |
|---|
| 696 | byte02 = chrb(&h5A) |
|---|
| 697 | byte03 = chrb(&hFF) |
|---|
| 698 | byte04 = chrb(&hFF) |
|---|
| 699 | byte05 = chrb(&h0A) |
|---|
| 700 | byte06 = chrb(&h03) |
|---|
| 701 | byte07 = chrb(&h01) |
|---|
| 702 | byte08 = chrb(&h78) |
|---|
| 703 | byte09 = chrb(&hBC) |
|---|
| 704 | byte10 = chrb(&h44) |
|---|
| 705 | byte11 = chrb(&h88) |
|---|
| 706 | byte12 = chrb(&h78) |
|---|
| 707 | byte13 = chrb(&h03) |
|---|
| 708 | byte14 = chrb(&hFF) |
|---|
| 709 | byte15 = chrb(&hFF) |
|---|
| 710 | byte16 = chrb(&hFF) |
|---|
| 711 | byte17 = chrb(&hFF) |
|---|
| 712 | byte18 = chrb(&hDD) |
|---|
| 713 | |
|---|
| 714 | else |
|---|
| 715 | //default thing to do |
|---|
| 716 | MsgBox "Error invalid car type" |
|---|
| 717 | return |
|---|
| 718 | end select |
|---|
| 719 | |
|---|
| 720 | //trigger the event definition so main program knows the values changed |
|---|
| 721 | valuesChanged() |
|---|
| 722 | End Sub |
|---|
| 723 | #tag EndMethod |
|---|
| 724 | |
|---|
| 725 | #tag Method, Flags = &h0 |
|---|
| 726 | Sub writeCar() |
|---|
| 727 | //Send set bytes to the car |
|---|
| 728 | mode = "write" |
|---|
| 729 | |
|---|
| 730 | dim sendstring as string |
|---|
| 731 | |
|---|
| 732 | calculateChecksum() |
|---|
| 733 | |
|---|
| 734 | sendstring = byte01 + byte02 + byte03 + byte04 + byte05 + byte06 + byte07 + byte08 + byte09 + byte10 + byte11 + byte12 + byte13 + byte14 + byte15 + byte16 + byte17 + byte18 |
|---|
| 735 | |
|---|
| 736 | me.Write(sendstring) |
|---|
| 737 | End Sub |
|---|
| 738 | #tag EndMethod |
|---|
| 739 | |
|---|
| 740 | |
|---|
| 741 | #tag Hook, Flags = &h0 |
|---|
| 742 | Event profileImported(profileName as string) |
|---|
| 743 | #tag EndHook |
|---|
| 744 | |
|---|
| 745 | #tag Hook, Flags = &h0 |
|---|
| 746 | Event valuesChanged() |
|---|
| 747 | #tag EndHook |
|---|
| 748 | |
|---|
| 749 | |
|---|
| 750 | #tag Note, Name = General |
|---|
| 751 | Car type must be set for this to operate |
|---|
| 752 | Car types supported by this application are |
|---|
| 753 | MR-03 |
|---|
| 754 | dNaNo |
|---|
| 755 | ASF |
|---|
| 756 | #tag EndNote |
|---|
| 757 | |
|---|
| 758 | #tag Note, Name = License |
|---|
| 759 | Copyright 2010 Jeremy Auten |
|---|
| 760 | |
|---|
| 761 | This file is part of Flip Side ICS Software. |
|---|
| 762 | |
|---|
| 763 | Flip Side ICS Software is free software: you can redistribute it and/or modify |
|---|
| 764 | it under the terms of the GNU General Public License as published by |
|---|
| 765 | the Free Software Foundation, either version 3 of the License, or |
|---|
| 766 | (at your option) any later version. |
|---|
| 767 | |
|---|
| 768 | Flip Side ICS Software is distributed in the hope that it will be useful, |
|---|
| 769 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
|---|
| 770 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|---|
| 771 | GNU General Public License for more details. |
|---|
| 772 | |
|---|
| 773 | You should have received a copy of the GNU General Public License |
|---|
| 774 | along with Flip Side ICS Software. If not, see <http://www.gnu.org/licenses/>. |
|---|
| 775 | #tag EndNote |
|---|
| 776 | |
|---|
| 777 | |
|---|
| 778 | #tag Property, Flags = &h21 |
|---|
| 779 | Private buffer As String |
|---|
| 780 | #tag EndProperty |
|---|
| 781 | |
|---|
| 782 | #tag Property, Flags = &h0 |
|---|
| 783 | byte01 As String |
|---|
| 784 | #tag EndProperty |
|---|
| 785 | |
|---|
| 786 | #tag Property, Flags = &h0 |
|---|
| 787 | byte02 As String |
|---|
| 788 | #tag EndProperty |
|---|
| 789 | |
|---|
| 790 | #tag Property, Flags = &h0 |
|---|
| 791 | byte03 As String |
|---|
| 792 | #tag EndProperty |
|---|
| 793 | |
|---|
| 794 | #tag Property, Flags = &h0 |
|---|
| 795 | byte04 As String |
|---|
| 796 | #tag EndProperty |
|---|
| 797 | |
|---|
| 798 | #tag Property, Flags = &h0 |
|---|
| 799 | byte05 As String |
|---|
| 800 | #tag EndProperty |
|---|
| 801 | |
|---|
| 802 | #tag Property, Flags = &h0 |
|---|
| 803 | byte06 As String |
|---|
| 804 | #tag EndProperty |
|---|
| 805 | |
|---|
| 806 | #tag Property, Flags = &h0 |
|---|
| 807 | byte07 As String |
|---|
| 808 | #tag EndProperty |
|---|
| 809 | |
|---|
| 810 | #tag Property, Flags = &h0 |
|---|
| 811 | byte08 As String |
|---|
| 812 | #tag EndProperty |
|---|
| 813 | |
|---|
| 814 | #tag Property, Flags = &h0 |
|---|
| 815 | byte09 As String |
|---|
| 816 | #tag EndProperty |
|---|
| 817 | |
|---|
| 818 | #tag Property, Flags = &h0 |
|---|
| 819 | byte10 As String |
|---|
| 820 | #tag EndProperty |
|---|
| 821 | |
|---|
| 822 | #tag Property, Flags = &h0 |
|---|
| 823 | byte11 As String |
|---|
| 824 | #tag EndProperty |
|---|
| 825 | |
|---|
| 826 | #tag Property, Flags = &h0 |
|---|
| 827 | byte12 As String |
|---|
| 828 | #tag EndProperty |
|---|
| 829 | |
|---|
| 830 | #tag Property, Flags = &h0 |
|---|
| 831 | byte13 As String |
|---|
| 832 | #tag EndProperty |
|---|
| 833 | |
|---|
| 834 | #tag Property, Flags = &h0 |
|---|
| 835 | byte14 As String |
|---|
| 836 | #tag EndProperty |
|---|
| 837 | |
|---|
| 838 | #tag Property, Flags = &h0 |
|---|
| 839 | byte15 As String |
|---|
| 840 | #tag EndProperty |
|---|
| 841 | |
|---|
| 842 | #tag Property, Flags = &h0 |
|---|
| 843 | byte16 As String |
|---|
| 844 | #tag EndProperty |
|---|
| 845 | |
|---|
| 846 | #tag Property, Flags = &h0 |
|---|
| 847 | byte17 As String |
|---|
| 848 | #tag EndProperty |
|---|
| 849 | |
|---|
| 850 | #tag Property, Flags = &h0 |
|---|
| 851 | byte18 As String |
|---|
| 852 | #tag EndProperty |
|---|
| 853 | |
|---|
| 854 | #tag Property, Flags = &h21 |
|---|
| 855 | Private carType As String = "MR-03" |
|---|
| 856 | #tag EndProperty |
|---|
| 857 | |
|---|
| 858 | #tag Property, Flags = &h0 |
|---|
| 859 | fsicsdb As REALSQLDatabase |
|---|
| 860 | #tag EndProperty |
|---|
| 861 | |
|---|
| 862 | #tag Property, Flags = &h21 |
|---|
| 863 | Private mode As String = "none" |
|---|
| 864 | #tag EndProperty |
|---|
| 865 | |
|---|
| 866 | |
|---|
| 867 | #tag ViewBehavior |
|---|
| 868 | #tag ViewProperty |
|---|
| 869 | Name="Baud" |
|---|
| 870 | Visible=true |
|---|
| 871 | Group="Behavior" |
|---|
| 872 | InitialValue="13" |
|---|
| 873 | Type="Integer" |
|---|
| 874 | EditorType="Enum" |
|---|
| 875 | InheritedFrom="serial" |
|---|
| 876 | #tag EnumValues |
|---|
| 877 | "0 - 300" |
|---|
| 878 | "1 - 600" |
|---|
| 879 | "2 - 1200" |
|---|
| 880 | "3 - 1800" |
|---|
| 881 | "4 - 2400" |
|---|
| 882 | "5 - 3600" |
|---|
| 883 | "6 - 4800" |
|---|
| 884 | "7 - 7200" |
|---|
| 885 | "8 - 9600" |
|---|
| 886 | "9 - 14400" |
|---|
| 887 | "10 - 19200" |
|---|
| 888 | "11 - 28800" |
|---|
| 889 | "12 - 38400" |
|---|
| 890 | "13 - 57600" |
|---|
| 891 | "14 - 115200" |
|---|
| 892 | "15 - 230400" |
|---|
| 893 | #tag EndEnumValues |
|---|
| 894 | #tag EndViewProperty |
|---|
| 895 | #tag ViewProperty |
|---|
| 896 | Name="Bits" |
|---|
| 897 | Visible=true |
|---|
| 898 | Group="Behavior" |
|---|
| 899 | InitialValue="3" |
|---|
| 900 | Type="Integer" |
|---|
| 901 | EditorType="Enum" |
|---|
| 902 | InheritedFrom="serial" |
|---|
| 903 | #tag EnumValues |
|---|
| 904 | "0 - 5 Data Bits" |
|---|
| 905 | "1 - 6 Data Bits" |
|---|
| 906 | "2 - 7 Data Bits" |
|---|
| 907 | "3 - 8 Data bits" |
|---|
| 908 | #tag EndEnumValues |
|---|
| 909 | #tag EndViewProperty |
|---|
| 910 | #tag ViewProperty |
|---|
| 911 | Name="byte01" |
|---|
| 912 | Group="Behavior" |
|---|
| 913 | InitialValue="&hFF" |
|---|
| 914 | Type="String" |
|---|
| 915 | EditorType="MultiLineEditor" |
|---|
| 916 | #tag EndViewProperty |
|---|
| 917 | #tag ViewProperty |
|---|
| 918 | Name="byte02" |
|---|
| 919 | Group="Behavior" |
|---|
| 920 | Type="String" |
|---|
| 921 | EditorType="MultiLineEditor" |
|---|
| 922 | #tag EndViewProperty |
|---|
| 923 | #tag ViewProperty |
|---|
| 924 | Name="byte03" |
|---|
| 925 | Group="Behavior" |
|---|
| 926 | Type="String" |
|---|
| 927 | EditorType="MultiLineEditor" |
|---|
| 928 | #tag EndViewProperty |
|---|
| 929 | #tag ViewProperty |
|---|
| 930 | Name="byte04" |
|---|
| 931 | Group="Behavior" |
|---|
| 932 | Type="String" |
|---|
| 933 | EditorType="MultiLineEditor" |
|---|
| 934 | #tag EndViewProperty |
|---|
| 935 | #tag ViewProperty |
|---|
| 936 | Name="byte05" |
|---|
| 937 | Group="Behavior" |
|---|
| 938 | Type="String" |
|---|
| 939 | EditorType="MultiLineEditor" |
|---|
| 940 | #tag EndViewProperty |
|---|
| 941 | #tag ViewProperty |
|---|
| 942 | Name="byte06" |
|---|
| 943 | Group="Behavior" |
|---|
| 944 | Type="String" |
|---|
| 945 | EditorType="MultiLineEditor" |
|---|
| 946 | #tag EndViewProperty |
|---|
| 947 | #tag ViewProperty |
|---|
| 948 | Name="byte07" |
|---|
| 949 | Group="Behavior" |
|---|
| 950 | Type="String" |
|---|
| 951 | EditorType="MultiLineEditor" |
|---|
| 952 | #tag EndViewProperty |
|---|
| 953 | #tag ViewProperty |
|---|
| 954 | Name="byte08" |
|---|
| 955 | Group="Behavior" |
|---|
| 956 | Type="String" |
|---|
| 957 | EditorType="MultiLineEditor" |
|---|
| 958 | #tag EndViewProperty |
|---|
| 959 | #tag ViewProperty |
|---|
| 960 | Name="byte09" |
|---|
| 961 | Group="Behavior" |
|---|
| 962 | Type="String" |
|---|
| 963 | EditorType="MultiLineEditor" |
|---|
| 964 | #tag EndViewProperty |
|---|
| 965 | #tag ViewProperty |
|---|
| 966 | Name="byte10" |
|---|
| 967 | Group="Behavior" |
|---|
| 968 | Type="String" |
|---|
| 969 | EditorType="MultiLineEditor" |
|---|
| 970 | #tag EndViewProperty |
|---|
| 971 | #tag ViewProperty |
|---|
| 972 | Name="byte11" |
|---|
| 973 | Group="Behavior" |
|---|
| 974 | Type="String" |
|---|
| 975 | EditorType="MultiLineEditor" |
|---|
| 976 | #tag EndViewProperty |
|---|
| 977 | #tag ViewProperty |
|---|
| 978 | Name="byte12" |
|---|
| 979 | Group="Behavior" |
|---|
| 980 | Type="String" |
|---|
| 981 | EditorType="MultiLineEditor" |
|---|
| 982 | #tag EndViewProperty |
|---|
| 983 | #tag ViewProperty |
|---|
| 984 | Name="byte13" |
|---|
| 985 | Group="Behavior" |
|---|
| 986 | Type="String" |
|---|
| 987 | EditorType="MultiLineEditor" |
|---|
| 988 | #tag EndViewProperty |
|---|
| 989 | #tag ViewProperty |
|---|
| 990 | Name="byte14" |
|---|
| 991 | Group="Behavior" |
|---|
| 992 | Type="String" |
|---|
| 993 | EditorType="MultiLineEditor" |
|---|
| 994 | #tag EndViewProperty |
|---|
| 995 | #tag ViewProperty |
|---|
| 996 | Name="byte15" |
|---|
| 997 | Group="Behavior" |
|---|
| 998 | Type="String" |
|---|
| 999 | EditorType="MultiLineEditor" |
|---|
| 1000 | #tag EndViewProperty |
|---|
| 1001 | #tag ViewProperty |
|---|
| 1002 | Name="byte16" |
|---|
| 1003 | Group="Behavior" |
|---|
| 1004 | Type="String" |
|---|
| 1005 | EditorType="MultiLineEditor" |
|---|
| 1006 | #tag EndViewProperty |
|---|
| 1007 | #tag ViewProperty |
|---|
| 1008 | Name="byte17" |
|---|
| 1009 | Group="Behavior" |
|---|
| 1010 | Type="String" |
|---|
| 1011 | EditorType="MultiLineEditor" |
|---|
| 1012 | #tag EndViewProperty |
|---|
| 1013 | #tag ViewProperty |
|---|
| 1014 | Name="byte18" |
|---|
| 1015 | Group="Behavior" |
|---|
| 1016 | Type="String" |
|---|
| 1017 | EditorType="MultiLineEditor" |
|---|
| 1018 | #tag EndViewProperty |
|---|
| 1019 | #tag ViewProperty |
|---|
| 1020 | Name="carType" |
|---|
| 1021 | Group="Behavior" |
|---|
| 1022 | InitialValue="MR-03" |
|---|
| 1023 | Type="String" |
|---|
| 1024 | EditorType="MultiLineEditor" |
|---|
| 1025 | #tag EndViewProperty |
|---|
| 1026 | #tag ViewProperty |
|---|
| 1027 | Name="CTS" |
|---|
| 1028 | Visible=true |
|---|
| 1029 | Group="Behavior" |
|---|
| 1030 | Type="Boolean" |
|---|
| 1031 | InheritedFrom="serial" |
|---|
| 1032 | #tag EndViewProperty |
|---|
| 1033 | #tag ViewProperty |
|---|
| 1034 | Name="DTR" |
|---|
| 1035 | Visible=true |
|---|
| 1036 | Group="Behavior" |
|---|
| 1037 | Type="Boolean" |
|---|
| 1038 | InheritedFrom="serial" |
|---|
| 1039 | #tag EndViewProperty |
|---|
| 1040 | #tag ViewProperty |
|---|
| 1041 | Name="Index" |
|---|
| 1042 | Visible=true |
|---|
| 1043 | Group="ID" |
|---|
| 1044 | Type="Integer" |
|---|
| 1045 | InheritedFrom="serial" |
|---|
| 1046 | #tag EndViewProperty |
|---|
| 1047 | #tag ViewProperty |
|---|
| 1048 | Name="Left" |
|---|
| 1049 | Visible=true |
|---|
| 1050 | Group="Position" |
|---|
| 1051 | InheritedFrom="serial" |
|---|
| 1052 | #tag EndViewProperty |
|---|
| 1053 | #tag ViewProperty |
|---|
| 1054 | Name="mode" |
|---|
| 1055 | Group="Behavior" |
|---|
| 1056 | InitialValue="read" |
|---|
| 1057 | Type="String" |
|---|
| 1058 | EditorType="MultiLineEditor" |
|---|
| 1059 | #tag EndViewProperty |
|---|
| 1060 | #tag ViewProperty |
|---|
| 1061 | Name="Name" |
|---|
| 1062 | Visible=true |
|---|
| 1063 | Group="ID" |
|---|
| 1064 | InheritedFrom="serial" |
|---|
| 1065 | #tag EndViewProperty |
|---|
| 1066 | #tag ViewProperty |
|---|
| 1067 | Name="Parity" |
|---|
| 1068 | Visible=true |
|---|
| 1069 | Group="Behavior" |
|---|
| 1070 | InitialValue="0" |
|---|
| 1071 | Type="Integer" |
|---|
| 1072 | EditorType="Enum" |
|---|
| 1073 | InheritedFrom="serial" |
|---|
| 1074 | #tag EnumValues |
|---|
| 1075 | "0 - No Parity" |
|---|
| 1076 | "1 - Odd Parity" |
|---|
| 1077 | "2 - EvenParity" |
|---|
| 1078 | #tag EndEnumValues |
|---|
| 1079 | #tag EndViewProperty |
|---|
| 1080 | #tag ViewProperty |
|---|
| 1081 | Name="Stop" |
|---|
| 1082 | Visible=true |
|---|
| 1083 | Group="Behavior" |
|---|
| 1084 | InitialValue="0" |
|---|
| 1085 | Type="Integer" |
|---|
| 1086 | EditorType="Enum" |
|---|
| 1087 | InheritedFrom="serial" |
|---|
| 1088 | #tag EnumValues |
|---|
| 1089 | "0 - 1 Stop Bit" |
|---|
| 1090 | "1 - 1.5 Stop Bits" |
|---|
| 1091 | "2 - 2 Stop Bits" |
|---|
| 1092 | #tag EndEnumValues |
|---|
| 1093 | #tag EndViewProperty |
|---|
| 1094 | #tag ViewProperty |
|---|
| 1095 | Name="Super" |
|---|
| 1096 | Visible=true |
|---|
| 1097 | Group="ID" |
|---|
| 1098 | InheritedFrom="serial" |
|---|
| 1099 | #tag EndViewProperty |
|---|
| 1100 | #tag ViewProperty |
|---|
| 1101 | Name="Top" |
|---|
| 1102 | Visible=true |
|---|
| 1103 | Group="Position" |
|---|
| 1104 | InheritedFrom="serial" |
|---|
| 1105 | #tag EndViewProperty |
|---|
| 1106 | #tag ViewProperty |
|---|
| 1107 | Name="XON" |
|---|
| 1108 | Visible=true |
|---|
| 1109 | Group="Behavior" |
|---|
| 1110 | Type="Boolean" |
|---|
| 1111 | InheritedFrom="serial" |
|---|
| 1112 | #tag EndViewProperty |
|---|
| 1113 | #tag EndViewBehavior |
|---|
| 1114 | End Class |
|---|
| 1115 | #tag EndClass |
|---|
