The I-Lap Lap Counter is an IR based lap counting system. Each transponder has a 7 character UID that the software will use. When the I-Lap hardware is used the software will receive the lap times from the lap counter instead of using the internal software timer. When the accuracy setting on the General Config screen is set to automatic the software will use 0.001 second resolution lap times as provided by the lap counter.

As a result of using the hardware lap timer the race pause functionality is disabled. This functionality depends on the software timer but when using I-Lap hardware we utilize the hardware timer so we can have 0.001 second resolution lap times. As a result pausing is not supported with this hardware.

For more information on the I-Lap hardware visit the RC Lap Counter website at http://www.rclapcounter.com/